Skip to content

how to move windows to another drive

SSD (solid-state drives) (SSD) can be so readily available that many individuals purchase one and transfer it to Windows 10 OS from their HDDs or mechanical drives. If you are building a computer starting from scratch, this may appear to be a simple job, but it’s difficult to upgrade on an old hard drive.

A good SSD with 1TB used to be an expensive luxury; however, nowadays, they’re much less expensive – as little as PS100. It’s an investment worth it as it’s a significant upgrade from HDDs. SSDs operate in a flash format, using integrated circuits that store information.

Furthermore, HDDs are almost obsolete, with only a few instances where vast storage space is needed. The majority of laptops that are available today are equipped with SSDs since their storage capacity is growing.

Transferring from an HDD or an older version to an SSD can be challenging, particularly if your computer is hosting critical applications and files. Once it’s done, you will experience immediate improvements to your PC’s performance and user interface.

Create a New System Image to Migrate Windows to Drives of Equivalent or Larger Size

It’s vital to emphasize that this method is only effective if the drive is of a similar or greater size. If your drive is smaller, you’ll need to follow the below steps using a third-party tool instead.

In the beginning, you’ll need to create a brand new system image for your Windows installation. To do that, click right-click on the Start menu, then select”Settings…

Within the settings menu, choose Update and Security, then Backup. The Backup menu is where you click the Go to Backup and Restore (Windows 7) option, which is located under the Want to find an earlier backup? Category.

In the previous Control Panel window, select the Create an image of your system located in the left menu. It is essential to connect an external device (such as, for example, one that is an external USB hard drive) at this moment unless you intend on using a network device to store your system’s picture (such as a network-connected media device).

A new menu to create a system image opens and will begin automatically searching for an external drive or storage location for storing an image of the entire system. When working with a portable drive, choose this option from the On the hard disk drop-down menu. Select the On Network Location option when you’re using a storage network location. Select the appropriate location on your network to save the file. Click the following option to proceed.

Windows will verify the partitions on your drive, which will be transferred into the new image of your system. Choose Start backup to start.

Let the creation of the system image process be completed. After completing the process, Windows will ask you whether you would like to create a new system repair disk. It might be a good idea to make this choice, particularly if you can damage the MBR or GPT boot files during the process. But you have the option of selecting one of the options to continue.

Once you’ve created your fresh system image, you’re ready to apply it to the new drive. Now connect your newly created hard drive to the PC and then remove the old hard drive. You can also keep the existing drive and format it to allow you to use it again to serve as a backup storage device.

Download A Reliable Windows 11/10 Migration Tool

To transfer OS to a different disk, an efficient OS migration tool must be used to provide assistance. Here are two tools to test:

EaseUS Suggestions: To securely move or transfer your Windows 11/10/8/7 operating system to a different hard drive, the EaseUS Partition manager software – PartitionMaster in Solution #1 is your most suitable choice.

Solution 1. How to Transfer Windows 11/10 to a New Hard Drive Via OS Migration Tool

Time: 25 minutes to 1 hour or less.

Help: Support for OS Migration for Windows 11/10/8/7/7/XP/Vista, and Windows servers, large and small large HDD/SSD.

To transfer Windows 11/10 data to an additional HDD or SSD, Follow the following two steps. It’s possible to transfer all your data from the C drive onto another drive without losing any information. Additionally, Windows and program reinstallations aren’t required.

#Phrase 1. Transfer Windows 11/10 to a New Hard Drive (HDD/SSD)

Important: Transferring OS onto SSD or HDD will remove and erase existing partitions and files on the disk you aim to migrate to when there isn’t enough allocated space on your target disk. If you have the necessary data, make sure you Backup the files on an external HDD before the transfer.

Step 1. Choose “Clone” from the left menu. Select “Migrate OS” and click “Next” to continue.

Step 2. Select the disk that you’d like to clone. Click “Next.”

Step 3. Step 3 “Yes” after checking the warning message. The partitions and data on the disk target will be erased. Be sure to back essential data before. If not, do it now.

Step 4. Review the design of your targeted disk. You can also use the options for disk layout to alter the design of your disk in the way you like. After that, click “Start” to migrate your operating system to a new disk.

Switch your new SSD onto the boot drive.

To complete this process, setting the new disk as the primary boot drive is recommended. You may leave the old drive on your computer should you decide to utilize it for a different purpose. In other cases, you can physically take it out.

Step 1: Boot into your PC’s BIOS or the UEFI settings. Typically, ESC works for this, and you can also utilize the delete key. If unsure, refer to online tutorials or your computer manufacturer’s support site.

Step 2: Open the boot settings tab, and disable or remove the old drive from being part of your boot choices. You can then include or enable the new drive instead. Specific BIOS or UEFI versions allow you to move the drive around or select it from a drop-down list.

Step 3. Once your new drive is selected as the primary boot option, press the save and leave buttons. The BIOS typically locates this. The system should be able to boot from the new SSD!

Create a copy of Windows 10 to another drive step by step

Now, you’re ready to copy Windows 10/11 to another drive. The feature we are using here can be described as Disk Clone. It lets you clone all your hard drives and non-system and system partitions for no cost.

It’s also possible to copy the operating system only to new drives, upgrade to a more advanced edition with a discount, and then utilize System Clone. System Clone feature. It will automatically select the required system partitions to allow Windows to function.

This article will demonstrate how you can move Windows 10 to another drive. The steps can be applied to other OSes like Windows 11, Windows 7, Windows 8, etc.

How to transfer Windows 10 to another drive:

1. Launch the software and go to the Clone tab. The choices here are System Clone, Disk Clone, and Partition Clone. The tutorial below will employ Disk Clone as an example.

2. Choose the source disk that has Windows 10 installed, and click Next.

3. Select the destination HDD or SSD. Then click Next to proceed.

4. Confirm the operation and then start Clone. There are a few additional suggestions that could be useful to you:

Once the progress has reached 100 percent, the Windows installation is transferred to a new hard drive.

How can I transfer Windows 10 to a new SSD or hard drive?

Follow the steps below, and you’ll be able to copy the existing Windows 10 OS to a new SSD or hard drive in a matter of minutes.

Step 1: Connect your new SSD (or hard drive) to the computer you want to move.

Step 2: Start DiskGenius Free Edition and click the System Migration button.

Step 3: Select the target disk, then click the Start button.

How can I move my operating system from HDD onto SSD?

DiskGenius Free Edition is the software that allows you to transfer your operating system and installed programs to the hard disk, SSD, or USB external disks. It is essential to ensure you’ve backed all your files to your destination drive. Follow the step-by-step instructions that you have read to finish this OS migration.

Bottom Line

This is the conclusion of this article. You are expected to have the essential information for upgrading Windows 10 to SSD without installing OS again. Now, you’re able to utilize MiniTool Partition Wizard or the MiniTool ShadowMaker back-upper to start the Windows 10 migration without losing the data.

When you use our default Windows 10 cloning tool to transfer OS from HDD to SSD or to clone a hard drive to SSD, Please let us know any questions you may have. Please let us know the method used for system migration and if you have any suggestions or suggestions. Leave a comment in the area below or email us at [email protected], and we’ll contact you as soon as possible.

Leave a Reply

Your email address will not be published. Required fields are marked *